The SHRUG 01 Knitting Pattern is an advanced beginner pattern for knitting a versatile ribbed shrug that can be worn around the shoulders or styled as an oversized cowl.

Worked entirely in 1×1 ribbing, SHRUG 01 creates a soft, highly stretchy fabric with a simple, modern silhouette. The seamless tube construction allows the piece to stretch comfortably around the shoulders while remaining relaxed and cozy when worn around the neck.

The downloadable PDF includes clear written instructions, sizing and finished measurements, yarn requirements, gauge information, and technique guidance to help you complete your project.

ABOUT THE PATTERN

SHRUG 01 is worked seamlessly in the round using 1×1 rib stitch throughout.

The simple tube construction requires no shaping, increases, decreases, seaming, cables, lace, or colourwork. The naturally stretchy ribbed fabric allows the finished piece to be worn two ways — stretched over the shoulders as a shrug or gathered around the neck as an oversized cowl.

Pattern Type: Shrug / Cowl
Skill Level: Advanced Beginner
Construction: Worked seamlessly in the round
Yarn Weight: Bulky
Sizes: One Size

SKILL LEVEL

ADVANCED BEGINNER

This pattern is suitable for knitters comfortable with:

• Casting on

• Knit stitches

• Purl stitches

• 1×1 rib stitch

• Joining and working in the round

• Binding off

• Weaving in ends

SIZES + FINISHED MEASUREMENTS

Sizes Included:
One Size

Designed to Fit:
Approximately 32–40" / 81–102 cm bust/chest circumference when worn around the shoulders.

Finished Measurements:

• Circumference, relaxed: 26" / 66 cm

• Width, laid flat: 13" / 33 cm

• Length: 18" / 45.5 cm

Fit Note:
SHRUG 01 is designed with a highly stretchy 1×1 ribbed fabric. When worn as a shrug, the ribbing expands to stretch comfortably around the shoulders. When worn as a cowl, the fabric remains more relaxed and gathers naturally around the neck.

YARN + GAUGE

Suggested Yarn:
Lion Brand Hue & Me

Yarn Weight:
Bulky / CYC #5

Yarn Requirements:
One Size: approximately 274 yd / 250 m
2 skeins / 250 g total

Gauge:
14 stitches × 14 rounds = 4" / 10 cm in 1×1 rib stitch

Suggested Needles:
5.5 mm / US 9 circular needles, or size needed to obtain gauge
24" / 60 cm–32" / 80 cm cable

Notions:

• Yarn needle

• Stitch markers

• Beginning-of-round marker

• Scissors

Full yarn, needle, gauge, and notion information is included in the PDF pattern.

CONSTRUCTION + TECHNIQUES

This pattern includes the following techniques:

• Casting on

• Joining to work in the round

• Working with circular needles

• Knit stitches

• Purl stitches

• 1×1 rib stitch

• Binding off

• Weaving in ends

NORWEGIAN KNITTING TUTORIALS

M1R KNIT specializes in teaching the Norwegian knitting method, a continental-style knitting technique with the working yarn held in the left hand.

You do not need to use the Norwegian knitting method to make this pattern unless specifically stated.

Visit M1R KNIT on YouTube for knitting tutorials demonstrating techniques using the Norwegian knitting method.

WHAT'S INCLUDED

✔ Complete downloadable PDF knitting pattern
✔ Step-by-step written instructions
✔ Sizing and finished measurements
✔ Yarn requirements
✔ Needle and notion information
✔ Gauge information
✔ Pattern abbreviations and technique notes
✔ Finished measurement schematic
✔ M1R KNIT tutorial resources
✔ Original M1R KNIT design

DIGITAL DOWNLOAD

This listing is for a DIGITAL PDF KNITTING PATTERN ONLY.

No physical product or finished knitted item will be shipped.

Your pattern will be available for digital download after purchase.

USAGE + COPYRIGHT

For personal, non-commercial use only.

Items made from this pattern may not be sold.

Pattern may not be shared, copied, reproduced, or redistributed.

© M1R KNIT. All Rights Reserved.

PATTERN SUPPORT

Questions while knitting? I’m happy to help.

Find more knitting patterns, tutorials, and technique guides from M1R KNIT:

Website: M1RKNIT.com
YouTube: @m1rknit
Instagram: @m1rknit
Ravelry: M1R KNIT

SHARE YOUR PROJECT

I’d love to see what you make.

Tag @m1rknit when sharing your finished M1R KNIT project.

The BEANIE 02 Knitting Pattern is an advanced beginner pattern for knitting a classic double-brim beanie with a clean stockinette finish and shaped crown.

Worked seamlessly in the round from the bottom up, BEANIE 02 features a warm double-folded brim and a simple, close-fitting silhouette. The understated stockinette fabric makes this an easy-to-wear everyday beanie while allowing the construction details to take centre stage.

The downloadable PDF includes clear written instructions, sizing and finished measurements, yarn requirements, gauge information, a schematic, abbreviations, and technique guidance to help you complete your project.

ABOUT THE PATTERN

BEANIE 02 is worked seamlessly from the bottom up in the round using stockinette stitch.

The brim is knit to double length, folded inward, and joined by knitting the live stitches together with the cast-on edge to create a smooth, warm double layer. The body is worked in stockinette before symmetrical decreases shape the crown.

Pattern Type: Beanie
Skill Level: Advanced Beginner
Construction: Bottom-up, seamless, worked in the round
Yarn Weight: DK
Sizes: One Size Adult

SKILL LEVEL

ADVANCED BEGINNER

This pattern is suitable for knitters comfortable with:

• Long-tail cast-on

• Joining and knitting in the round

• Stockinette stitch in the round

• Creating and joining a double-folded brim

• Working decreases including ssk and k2tog

• Working small circumferences using DPNs or Magic Loop

• Gathering remaining stitches to close a crown

SIZES + FINISHED MEASUREMENTS

Sizes Included:
One Size Adult

Designed to Fit:
Head circumference: 21–23"/53–58.5 cm

Finished Measurements:
Circumference: 18.5"/47 cm
Height with brim folded: 8.5"/21.5 cm
Folded brim depth: approximately 3"/7.5 cm

Recommended Ease:
Approximately 2.5–4.5"/6–11.5 cm of negative ease for a close, comfortable fit.

YARN + GAUGE

Suggested Yarn:
DROPS Lima in Pearl Grey #9020

Yarn Weight:
DK

Yarn Requirements:
One Size: 2 skeins
50 g/109 yds per skein
Approximately 218 yds/200 m total

Gauge:
20 stitches × 28 rounds = 4"/10 cm in stockinette stitch, blocked

Suggested Needles:

• 3.25 mm/US 3 circular needle for brim

• 4 mm/US 6, 16"/40 cm circular needle for body, or size needed to obtain gauge

• 4 mm/US 6 DPNs or 32–40"/80–100 cm circular needle for Magic Loop during crown shaping

Notions:

• Yarn needle

• Stitch markers

• Beginning-of-round marker

• Scissors

Full yarn, needle, gauge, and notion information is included in the PDF pattern.

CONSTRUCTION + TECHNIQUES

This pattern includes the following techniques:

• Long-tail cast-on

• Knitting in the round

• Stockinette stitch

• Folding and joining a double-knit brim

• ssk left-leaning decreases

• k2tog right-leaning decreases

• Crown shaping

• DPN or Magic Loop small-circumference knitting

• Gathering stitches to close the crown

• Blocking

NORWEGIAN KNITTING TUTORIALS

M1R KNIT specializes in teaching the Norwegian knitting method, a continental-style knitting technique with the working yarn held in the left hand.

You do not need to use the Norwegian knitting method to make this pattern.

M1R KNIT knitting tutorials can be used alongside the pattern to help you learn and practise many of the techniques used throughout the project.

WHAT'S INCLUDED

✔ Complete downloadable PDF knitting pattern
✔ Step-by-step written instructions
✔ Sizing and finished measurements
✔ Yarn requirements
✔ Needle and notion information
✔ Gauge information
✔ Pattern abbreviations and technique notes
✔ Beanie schematic
✔ Crown-shaping instructions
✔ Original M1R KNIT design

DIGITAL DOWNLOAD

This listing is for a DIGITAL PDF KNITTING PATTERN ONLY.

No physical product or finished knitted item will be shipped.

Your pattern will be available for digital download after purchase.

USAGE + COPYRIGHT

This pattern may not be shared, copied, or redistributed.

Small businesses with an annual income of CAD $30,000 or less may sell finished items made from this pattern with credit given to M1R KNIT.

© M1R KNIT. All Rights Reserved.

PATTERN SUPPORT

Questions while knitting? I’m happy to help.

Find more knitting patterns, tutorials, and technique guides from M1R KNIT:

Website: M1RKNIT.com
YouTube: @m1rknit
Instagram: @m1rknit
Ravelry: M1R KNIT

SHARE YOUR PROJECT

I’d love to see what you make.

Tag @m1rknit when sharing your finished M1R KNIT project.

The Turtleneck Pullover 01 Knitting Pattern is an advanced beginner sweater pattern featuring top-down raglan construction, a classic folded turtleneck, and clean stockinette fabric finished with 1 × 1 twisted rib.

Designed with approximately 4–4.5"/10–11.5 cm of positive ease, this pullover has a comfortable, classic fit with long sleeves and a deep ribbed hem. Wide raglan increases create a subtle design detail along the shoulders while maintaining the simple, timeless look of the sweater.

The downloadable PDF includes clear written instructions, sizing and finished measurements, yarn requirements, gauge information, schematics, and technique guidance to help you complete your project.

ABOUT THE PATTERN

Turtleneck Pullover 01 is worked top-down, beginning with the upper body worked flat while the neckline and raglan shaping are established. The work is then joined in the round before the body and sleeves are divided and worked separately.

The body and sleeves are worked primarily in stockinette stitch. The lower hem and sleeve cuffs are finished in 1 × 1 twisted rib, and the turtleneck collar is picked up and worked last.

Pattern Type: Pullover Sweater
Skill Level: Advanced Beginner
Construction: Top-down raglan; initially worked flat, then joined and worked in the round
Yarn Weight: Worsted
Sizes: XS (S, M, L, XL, 2X)

SKILL LEVEL

ADVANCED BEGINNER

This pattern is suitable for knitters comfortable with:

• Working both flat and in the round

• Raglan increases and basic garment shaping

• Working M1R/M1L and purl-side increases

• Separating body and sleeve stitches

• Picking up stitches

• Following detailed written instructions

SIZES + FINISHED MEASUREMENTS

Sizes Included:
XS (S, M, L, XL, 2X)

Designed to Fit Bust Circumference:
30 (34.5, 38, 41, 45.5, 48)"/76 (87.5, 96.5, 104, 115.5, 122) cm

Finished Bust Circumference:
34 (38.5, 42.5, 45, 49.5, 52)"/86 (98, 108, 114, 126, 132) cm

Finished Length:
20.5 (21, 22, 22.5, 23, 24)"/52 (53, 56, 57, 58, 61) cm

Armhole Depth:
8.25 (8.5, 9, 9.5, 10, 10.5)"/21 (22, 23, 24, 25, 27) cm

Sleeve Length:
19"/48 cm

Recommended Ease:
Approximately 4–4.5"/10–11.5 cm of positive ease.

YARN + GAUGE

Suggested Yarn:
Lion Brand Pound of Love®

Yarn Weight:
Worsted

Yarn Requirements:

XS: 900 m
S: 1033 m
M: 1144 m
L: 1230 m
XL: 1347 m
2X: 1493 m

The pattern recommends 2 skeins for all sizes when using Lion Brand Pound of Love® at approximately 932 m/454 g per skein.

Gauge:
19 stitches × 24 rounds = 4"/10 cm in stockinette stitch, washed and blocked.

Suggested Needles:

5 mm/US 8 or size needed to obtain gauge
3.5 mm/US 4 for ribbing

Circular needles appropriate for working the body, neckband, and small-circumference sleeves are required.

Notions:

• Yarn needle

• Stitch markers

• Stitch holders or waste yarn

Full yarn, needle, gauge, and notion information is included in the PDF pattern.

CONSTRUCTION + TECHNIQUES

This pattern includes the following techniques:

• Top-down raglan construction

• Working flat and in the round

• Stockinette stitch

• Wide M1R and M1L raglan increases

• M1RP and M1LP purl-side increases

• Neckline shaping

• Separating body and sleeves

• Picking up stitches

• K2tog and SSK decreases

• 1 × 1 twisted rib

• Stretchy bind off

NORWEGIAN KNITTING TUTORIALS

M1R KNIT specializes in teaching the Norwegian knitting method, a continental-style knitting technique with the working yarn held in the left hand.

You do not need to use the Norwegian knitting method to make this pattern unless specifically stated.

Where helpful, the pattern includes links to M1R KNIT video tutorials demonstrating knitting techniques using the Norwegian knitting method.

WHAT'S INCLUDED

✔ Complete downloadable PDF knitting pattern
✔ Step-by-step written instructions
✔ Sizes XS–2X
✔ Sizing and finished measurements
✔ Yarn requirements
✔ Needle and notion information
✔ Gauge information
✔ Pattern abbreviations and technique notes
✔ Finished garment schematic
✔ Row-by-row raglan shaping instructions for each size
✔ Links to helpful M1R KNIT tutorials where applicable
✔ Original M1R KNIT design

DIGITAL DOWNLOAD

This listing is for a DIGITAL PDF KNITTING PATTERN ONLY.

No physical product or finished knitted item will be shipped.

Your pattern will be available for digital download after purchase.

USAGE + COPYRIGHT

For personal, non-commercial use only.

Items made from this pattern may not be sold.

Pattern may not be shared, copied, or redistributed.

© M1R KNIT. All Rights Reserved.

PATTERN SUPPORT

Questions while knitting? I’m happy to help.

Find more knitting patterns, tutorials, and technique guides from M1R KNIT:

Website: M1RKNIT.com
YouTube: @m1rknit
Instagram: @m1rknit
Ravelry: M1R KNIT

SHARE YOUR PROJECT

I’d love to see what you make.

Tag @m1rknit when sharing your finished M1R KNIT project.

The Blanket 02 Knitting Pattern is an advanced beginner pattern for knitting a classic textured blanket featuring a simple staggered eyelet stitch and a clean applied I-cord edging.

Worked flat in an easy-to-follow 8-row repeat, the staggered eyelets create a light, understated texture across the surface of the blanket. The finished blanket is bordered with an applied I-cord for a polished, modern edge.

The downloadable PDF includes clear written instructions, sizing and finished measurements, yarn requirements, gauge information, and technique guidance to help you complete your project.

A full tutorial for this blanket project is also available on the M1R KNIT blog and YouTube channel here: https://m1rknit.com/tutorials/blanket-02

ABOUT THE PATTERN

Blanket 02 is worked flat using an 8-row staggered eyelet stitch pattern. After the main blanket is completed and bound off, an applied I-cord is worked around the entire perimeter to create a smooth, finished edge.

The eyelet pattern uses simple yarn overs and decreases to create evenly spaced openings that shift position through the repeat, producing the subtle staggered design.

Pattern Type: Blanket
Skill Level: Advanced Beginner
Construction: Worked flat with applied I-cord edging
Yarn Weight: Worsted
Sizes: Baby Small through King

SKILL LEVEL

ADVANCED BEGINNER

This pattern is suitable for knitters comfortable with:

• Knitting

• Purling

• Long-tail cast-on

• Yarn overs

• K2TOG decreases

• Working a repeating stitch pattern

• Picking up and knitting stitches

• Applied I-cord edging

• Grafting live I-cord stitches

SIZES + FINISHED MEASUREMENTS

Sizes Included:

Baby Small
Baby Large
Throw
Twin
Queen
King

Finished Measurements:

Baby Small: 30 × 36" (76 × 91.5 cm)
Baby Large: 40 × 60" (101.5 × 152.5 cm)
Throw: 50 × 60" (127 × 152.5 cm)
Twin: 65 × 90" (165 × 228.5 cm)
Queen: 90 × 90" (228.5 × 228.5 cm)
King: 108 × 92" (274.5 × 233.5 cm)

YARN + GAUGE

Suggested Yarn:
Lion Brand Wool-Ease

Yarn Weight:
Worsted Weight

Yarn Requirements:

Each skein contains approximately 180 metres / 197 yards.

Baby Small: 5 skeins — approx. 900 m / 984 yd
Baby Large: 10 skeins — approx. 1,800 m / 1,969 yd
Throw: 13 skeins — approx. 2,340 m / 2,559 yd
Twin: 24 skeins — approx. 4,320 m / 4,724 yd
Queen: 33 skeins — approx. 5,940 m / 6,496 yd
King: 41 skeins — approx. 7,380 m / 8,071 yd

Gauge:
16 stitches × 24 rows = 4" (10 cm) in pattern, blocked.

Suggested Needles:
4.5 mm (US 7) circular needles, or size needed to obtain gauge

Recommended Circular Needle Lengths, Tip to Tip:

Baby Small: 32" / 80 cm
Baby Large: 40" / 100 cm
Throw: 40" / 100 cm
Twin: 47" / 120 cm
Queen: 60" / 150 cm minimum
King: 60" / 150 cm minimum; longer preferred

Notions:

• Tape measure

• Scissors

• Tapestry needle

Full yarn, needle, gauge, and notion information is included in the PDF pattern.

CONSTRUCTION + TECHNIQUES

This pattern includes the following techniques:

• Long-tail cast-on

• Knitting and purling

• Staggered eyelet stitch pattern

• Yarn overs

• K2TOG decreases

• Working an 8-row stitch repeat

• Picking up and knitting stitches

• Applied I-cord edging

• Working I-cord around corners

• Grafting I-cord ends

• Blocking to finished measurements

NORWEGIAN KNITTING TUTORIALS

M1R KNIT specializes in teaching the Norwegian knitting method, a continental-style knitting technique with the working yarn held in the left hand.

You do not need to use the Norwegian knitting method to make this pattern unless specifically stated.

Where helpful, the pattern includes links to M1R KNIT video tutorials demonstrating knitting techniques using the Norwegian knitting method. Learn the Norwegian knitting method here: https://m1rknit.com/tutorials/start-here-learn-the-norwegian-knitting-method

A full Blanket 02 project tutorial is also available on the M1R KNIT blog and YouTube channel: https://m1rknit.com/tutorials/blanket-02

WHAT'S INCLUDED

✔ Complete downloadable PDF knitting pattern
✔ Step-by-step written instructions
✔ Six blanket sizes from Baby Small through King
✔ Finished measurements
✔ Yarn requirements for every size
✔ Needle and notion information
✔ Gauge information
✔ Pattern abbreviations and technique notes
✔ Staggered eyelet stitch instructions
✔ Applied I-cord edging instructions
✔ I-cord grafting instructions
✔ Links to helpful M1R KNIT tutorials where applicable
✔ Full project tutorial available on the M1R KNIT blog and YouTube channel
✔ Original M1R KNIT design

DIGITAL DOWNLOAD

This listing is for a DIGITAL PDF KNITTING PATTERN ONLY.

No physical product or finished knitted item will be shipped.

Your pattern will be available for digital download after purchase.

USAGE + COPYRIGHT

This pattern may not be shared, copied, reproduced or redistributed.

Small businesses with an annual income of $30,000 CAD or less may sell finished items made from this pattern with credit given to M1R KNIT.

The pattern itself may not be reproduced, resold or distributed.

©2026 M1R KNIT. All Rights Reserved.

PATTERN SUPPORT

Questions while knitting? I’m happy to help.

Find more knitting patterns, tutorials and technique guides from M1R KNIT:

Website:M1RKNIT.com
YouTube: @m1rknit
Instagram: @m1rknit
Ravelry: M1R KNIT

SHARE YOUR PROJECT

I’d love to see what you make.

Tag @m1rknit when sharing your finished M1R KNIT project.

The BEANIE 01 Knitting Pattern is a confident beginner pattern for knitting a classic, fitted adult beanie featuring a deep folded brim worked in half-twisted rib and simple stockinette construction.

Worked seamlessly from the bottom up, BEANIE 01 combines clean, classic styling with traditional crown shaping for an everyday hat you’ll reach for again and again.

The downloadable PDF includes clear written instructions, finished measurements, yarn requirements, gauge information, abbreviations and technique guidance to help you complete your project.

ABOUT THE PATTERN

BEANIE 01 is worked seamlessly from the bottom up in the round.

The beanie begins with a 4" / 10 cm half-twisted rib brim designed to be worn folded. The body is worked in stockinette stitch before the crown is shaped with evenly spaced K2tog decreases. Double-pointed needles are used as the crown circumference becomes too small for the circular needle.

Pattern Type: Beanie
Skill Level: Confident Beginner
Construction: Bottom-up, seamless, worked in the round
Yarn Weight: Worsted
Sizes: One Size

SKILL LEVEL

CONFIDENT BEGINNER

This pattern is suitable for knitters comfortable with:

• Long-tail cast on

• Half-twisted rib

• Working in the round

• Stockinette stitch

• K2tog decreases

• Switching needle sizes

• Crown shaping

• Working with double-pointed needles

SIZES + FINISHED MEASUREMENTS

Sizes Included:
One Size

Designed to Fit:
Head circumference: 20.5–23" / 52–58.5 cm

Finished Measurements:
Hat circumference: 18.5" / 47 cm
Hat height: 10.75" / 27.3 cm
Brim depth: 4" / 10 cm unfolded

Recommended Ease:
Approximately 2–4.5" / 5–11.5 cm of negative ease, depending on head circumference.

YARN + GAUGE

Suggested Yarn:
Lion Brand Wool-Ease Worsted

Yarn Weight:
Worsted

Yarn Requirements:
85 g / 180 m
1 skein in Wheat [620-402]

Gauge:
18 stitches × 24 rounds = 4" × 4" / 10 × 10 cm in stockinette stitch, blocked.

Suggested Needles:
4 mm (US 6) 16" / 40 cm circular needle for ribbing
5 mm (US 8) 16" / 40 cm circular needle, or size needed to obtain gauge, for the main body
5 mm (US 8) DPNs, or DPNs in the size needed to obtain gauge, for crown shaping

Notions:

• Yarn needle

• 7 stitch markers — 1 BOR marker + 6 section markers

• Scissors

Full yarn, needle, gauge and notion information is included in the PDF pattern.

CONSTRUCTION + TECHNIQUES

This pattern includes the following techniques:

• Long-tail cast on

• Half-twisted rib

• Working in the round

• Stockinette stitch

• Switching needle sizes

• K2tog decreases

• Crown shaping

• Double-pointed needles

NORWEGIAN KNITTING TUTORIALS

M1R KNIT specializes in teaching the Norwegian knitting method, a continental-style knitting technique with the working yarn held in the left hand.

You do not need to use the Norwegian knitting method to make BEANIE 01.

Where helpful, M1R KNIT tutorials demonstrate knitting techniques using the Norwegian knitting method so you can build your skills while working through your projects.

WHAT'S INCLUDED

✔ Complete downloadable PDF knitting pattern
✔ Step-by-step written instructions
✔ Finished measurements and fit information
✔ Yarn requirements
✔ Needle and notion information
✔ Gauge information
✔ Pattern abbreviations and technique notes
✔ Finished-measurement schematic
✔ Links to helpful M1R KNIT tutorials where applicable
✔ Original M1R KNIT design

DIGITAL DOWNLOAD

This listing is for a DIGITAL PDF KNITTING PATTERN ONLY.

No physical product or finished knitted item will be shipped.

Your pattern will be available for digital download after purchase.

USAGE + COPYRIGHT

This pattern and its instructions may not be copied, shared, reproduced or redistributed.

Small businesses with an annual income of $30,000 CAD or less may sell finished items made from this pattern. Please credit M1R KNIT as the pattern designer.

© 2026 M1R KNIT. All Rights Reserved.

PATTERN SUPPORT

Questions while knitting? I’m happy to help.

Find more knitting patterns, tutorials and technique guides from M1R KNIT:

Website: M1RKNIT.com
YouTube: @m1rknit
Instagram: @m1rknit
Ravelry: M1R KNIT

SHARE YOUR PROJECT

I’d love to see what you make.

Tag @m1rknit when sharing your finished BEANIE 01.

The Raglan Pullover 01 Knitting Pattern is an advanced beginner pattern for knitting a classic top-down raglan sweater featuring a shaped neckline, relaxed fit, simple stockinette fabric, and contrasting stripes.

Worked seamlessly from the top down, the pullover has approximately 3.5–4 in / 9–10 cm of positive ease for an easy, comfortable fit. The body and sleeves are finished with 1 × 1 ribbing, with the option of a regular or folded ribbed neckband.

The downloadable PDF includes clear written instructions, sizing and finished measurements, yarn requirements, gauge information, and technique guidance to help you complete your project.

Watch the pattern tutorial here: https://youtu.be/ZDgLrPKm8xw

ABOUT THE PATTERN

Raglan Pullover 01 is worked top down, beginning with the neckline and upper yoke worked flat while the front neck and raglan shaping are created simultaneously.

Once the front neckline is complete, the sweater is joined and worked in the round. Sleeve stitches are placed on hold while the body is completed, then each sleeve is worked from the underarm to the cuff. Neckband stitches are picked up and worked last.

Pattern Type: Pullover / Sweater
Skill Level: Advanced Beginner
Construction: Top-down raglan; worked flat and in the round; seamless
Yarn Weight: DK
Sizes: XS (S, M, L, XL, 2X, 3X, 4X)

SKILL LEVEL

ADVANCED BEGINNER

This pattern is suitable for knitters comfortable with:

• Knitting and purling

• Working flat and in the round

• Increasing and decreasing

• Following size-specific instructions and stitch counts

• Picking up and knitting stitches

SIZES + FINISHED MEASUREMENTS

Sizes Included:
XS (S, M, L, XL, 2X, 3X, 4X)

Designed to Fit Bust Circumference:
30 (34.5, 38, 41, 45.5, 48, 53, 57.5) in
76 (87.5, 96.5, 104, 115.5, 122, 135, 146) cm

Finished Bust Circumference:
34 (38.5, 42, 44.5, 49.5, 52, 56.5, 61.5) in
86 (98, 106.5, 113, 126, 132, 143.5, 156) cm

Recommended Ease:
Approximately 3.5–4 in / 9–10 cm of positive ease.

YARN + GAUGE

Suggested Yarn:
DK-weight superwash merino in two contrasting colours.

The sample is shown in:

MC: Camargue Ivory
CC: Dark Horse

Yarn Weight:
DK

Total Yarn Requirements:

XS: 1,216 yd / 1,112 m — 500 g
S: 1,416 yd / 1,295 m — 600 g
M: 1,559 yd / 1,426 m — 700 g
L: 1,631 yd / 1,491 m — 700 g
XL: 1,879 yd / 1,718 m — 800 g
2X: 1,977 yd / 1,808 m — 900 g
3X: 2,201 yd / 2,013 m — 900 g
4X: 2,390 yd / 2,185 m — 1,000 g

The pattern also provides the MC and CC weight requirements for each size.

Gauge:
19 stitches × 30 rounds = 4 in × 4 in / 10 × 10 cm in stockinette stitch worked in the round, measured after washing and drying.

Suggested Needles:
US 7 / 4.5 mm — main body and sleeves
US 6 / 4 mm — neckband
US 4 / 3.5 mm — ribbing
or size needed to obtain gauge

Notions:
Stitch markers
Stitch holders or waste yarn
Locking stitch marker or safety pin
Yarn needle
Scissors

Full yarn, needle, gauge, and notion information is included in the PDF pattern.

CONSTRUCTION + TECHNIQUES

This pattern includes the following techniques:

• Top-down raglan construction

• Stockinette stitch worked flat and in the round

• Kfb and pfb raglan increases

• Cable cast-on for neckline shaping

• Knitted cast-on at the underarms

• Placing sleeve stitches on hold

• Working contrasting stripes in the round

• SSK and k2tog sleeve decreases

• 1 × 1 ribbing

• Picking up and knitting neckline stitches

• Flexible bind off

• Optional folded ribbed neckband

NORWEGIAN KNITTING TUTORIALS

M1R KNIT specializes in teaching the Norwegian knitting method, a continental-style knitting technique with the working yarn held in the left hand.

You do not need to use the Norwegian knitting method to make this pattern unless specifically stated.

Where helpful, the pattern includes links to M1R KNIT video tutorials demonstrating knitting techniques using the Norwegian knitting method.

WHAT'S INCLUDED

✔ Complete downloadable PDF knitting pattern
✔ Step-by-step written instructions
✔ Sizes XS–4X
✔ Sizing and finished measurements
✔ Yarn requirements
✔ Needle and notion information
✔ Gauge information
✔ Pattern abbreviations and technique notes
✔ Links to helpful M1R KNIT tutorials where applicable
✔ Original M1R KNIT design

DIGITAL DOWNLOAD

This listing is for a DIGITAL PDF KNITTING PATTERN ONLY.

No physical product or finished knitted item will be shipped.

Your pattern will be available for digital download after purchase.

USAGE + COPYRIGHT

This pattern may not be shared, copied, reproduced, or redistributed.

Small businesses with an annual income of $30,000 CAD or less may sell finished items made from this pattern with credit given to M1R KNIT.

© M1R KNIT. All Rights Reserved.

PATTERN SUPPORT

Questions while knitting? I’m happy to help.

Find more knitting patterns, tutorials, and technique guides from M1R KNIT:

Website: M1RKNIT.com
YouTube: @m1rknit
Instagram: @m1rknit
Ravelry: M1R KNIT

SHARE YOUR PROJECT

I’d love to see what you make.

Tag @m1rknit when sharing your finished M1R KNIT project.

The MITTENS 01 Knitting Pattern is an intermediate pattern for knitting a pair of classic mittens worked seamlessly in the round using the magic-loop method.

Designed with a clean stockinette hand, twisted rib cuff, shaped thumb gusset, and tapered mitten top, MITTENS 01 is a timeless everyday mitten with a simple, polished finish.

The downloadable PDF includes clear written instructions, sizing and finished measurements, yarn requirements, gauge information, schematics, abbreviations, and technique guidance to help you complete your project.

Tutorial support: https://youtu.be/1Zr5gISF05M?si=fgACDpB6K5OB2q53

ABOUT THE PATTERN

MITTENS 01 is worked seamlessly from the cuff up in the round using the magic-loop method.

The mitten begins with a twisted rib cuff before transitioning to stockinette stitch. A shaped thumb gusset is created with increases, the thumb stitches are placed on hold while the hand is completed, and the mitten top is shaped with paired decreases before being grafted closed using Kitchener stitch. The held thumb stitches are then returned to the needles and worked in the round.

Pattern Type: Mittens
Skill Level: Intermediate
Construction: Cuff-up, seamless, worked in the round using magic loop
Yarn Weight: DK
Sizes: Women’s S (M, L, XL)

SKILL LEVEL

INTERMEDIATE

This pattern is suitable for knitters comfortable with:

• Working small circumferences in the round using magic loop

• Long-tail cast-on

• Twisted ribbing

• Working increases and decreases

• Thumb gusset construction

• Kitchener stitch

SIZES + FINISHED MEASUREMENTS

Sizes Included:
Women’s S (M, L, XL)

Designed to Fit Hand Circumference:
S: 6.75" / 17 cm
M: 7.25" / 18.5 cm
L: 8" / 20.5 cm
XL: 8.75" / 22 cm

Finished Total Length:
S: 9" / 22.8 cm
M: 9.5" / 24 cm
L: 10.5" / 26.6 cm
XL: 10.75" / 27.3 cm

Cuff Length:
All sizes: 3" / 7.62 cm

Thumb Length:
S: 1.25" / 3.1 cm
M: 1.5" / 3.8 cm
L: 1.75" / 4.4 cm
XL: 2" / 5 cm

YARN + GAUGE

Suggested Yarn:
Sandnes Garn Double Sunday

Yarn Weight:
DK
50 g / 108 m (approx. 118 yd) per skein

Sample Colour:
3880 Dark Chocolate

Yarn Requirements:
S: 170–190 yd / 155–174 m
M: 170–190 yd / 155–174 m
L: 190–210 yd / 174–192 m
XL: 210–230 yd / 192–210 m

Gauge:
24 stitches × 36 rounds = 4" / 10 cm in stockinette stitch, worked in the round and unblocked.

Suggested Needles:
3.25 mm / US 3 circular needle with a 32" / 81 cm cable, or size needed to obtain gauge
2.75 mm / US 2 circular needle with a 32" / 81 cm cable for ribbing

Notions:

• Yarn needle

• Stitch markers

• Beginning-of-round marker

• Scissors

• Waste yarn for holding thumb stitches

Full yarn, needle, gauge, and notion information is included in the PDF pattern.

CONSTRUCTION + TECHNIQUES

This pattern includes the following techniques:

• Long-tail cast-on

• Magic-loop knitting

• Twisted 1 × 1 ribbing

• Stockinette stitch worked in the round

• M1R and M1L increases

• Thumb gusset construction

• SSK and K2TOG decreases

• Holding and returning live thumb stitches

• Picking up stitches

• Kitchener stitch

NORWEGIAN KNITTING TUTORIALS

M1R KNIT specializes in teaching the Norwegian knitting method, a continental-style knitting technique with the working yarn held in the left hand.

You do not need to use the Norwegian knitting method to make this pattern unless specifically stated.

Where helpful, the pattern includes links to M1R KNIT video tutorials demonstrating knitting techniques using the Norwegian knitting method.

WHAT'S INCLUDED

✔ Complete downloadable PDF knitting pattern
✔ Step-by-step written instructions
✔ Women’s sizes S–XL
✔ Sizing and finished measurements
✔ Yarn requirements
✔ Needle and notion information
✔ Gauge information
✔ Pattern abbreviations and technique notes
✔ Mitten schematic and measurement chart
✔ Links to helpful M1R KNIT tutorials where applicable
✔ Original M1R KNIT design

DIGITAL DOWNLOAD

This listing is for a DIGITAL PDF KNITTING PATTERN ONLY.

No physical product or finished knitted item will be shipped.

Your pattern will be available for digital download after purchase.

USAGE + COPYRIGHT

For personal, non-commercial use only.

Items made from this pattern may not be sold.

Pattern may not be shared, copied, or redistributed.

© M1R KNIT. All Rights Reserved.

PATTERN SUPPORT

Questions while knitting? I’m happy to help.

Find more knitting patterns, tutorials, and technique guides from M1R KNIT:

Website: M1RKNIT.com
YouTube: @m1rknit
Instagram: @m1rknit
Ravelry: M1R KNIT

SHARE YOUR PROJECT

I’d love to see what you make.

Tag @m1rknit when sharing your finished M1R KNIT project.

The SOCKS 01 Knitting Pattern is an intermediate pattern for knitting a classic pair of cuff-down shortie socks featuring 2 x 2 ribbing, a slip-stitch heel flap, traditional heel turn, gusset shaping and a grafted toe.

Worked in fingering-weight yarn, SOCKS 01 has a clean, simple look designed for everyday wear. The short leg and classic stockinette construction make this a versatile sock pattern while still introducing knitters to traditional heel-flap-and-gusset sock construction.

The downloadable PDF includes clear written instructions, sizing and finished measurements, yarn requirements, gauge information, a size chart, pattern abbreviations and technique guidance to help you complete your project.

ABOUT THE PATTERN

SOCKS 01 is worked from the cuff down and in the round using the magic loop method.

The sock begins with a 2 x 2 ribbed cuff followed by a short stockinette leg. A slip-stitch heel flap is worked flat, followed by a traditional heel turn and picked-up gusset stitches. The foot is worked in stockinette stitch before shaping the toe and grafting the remaining stitches using Kitchener stitch.

Pattern Type: Socks
Skill Level: Intermediate
Construction: Cuff-down, heel flap and gusset, worked in the round using magic loop
Yarn Weight: Fingering
Sizes: Adult S (M, L)

SKILL LEVEL

INTERMEDIATE

This pattern is suitable for knitters comfortable with:

• Working in the round using magic loop

• 2 x 2 ribbing

• Working stockinette stitch

• Working a slip-stitch heel flap

• Turning a heel

• Picking up stitches

• Working gusset decreases

• Kitchener stitch

SIZES + FINISHED MEASUREMENTS

Sizes Included:
Adult S (M, L)

Designed to Fit Foot Circumference:
S: approximately 7" / 18 cm
M: approximately 8" / 20.5 cm
L: approximately 9" / 23 cm

Finished Sock Circumference:
S: approximately 6¼" / 16 cm
M: approximately 7⅛" / 18 cm
L: approximately 8" / 20.5 cm

Cuff Ribbing:
0.75" / 2 cm

Stockinette Leg:
2" / 5 cm

Recommended Ease:
Approximately 10–11% negative ease around the foot.

YARN + GAUGE

Suggested Yarn:
DROPS Design Nord

Yarn Weight:
Fingering weight

Yarn Requirements:
S: 2 skeins
M: 2 skeins
L: 2 skeins

DROPS Nord contains approximately 170 m per 50 g skein, giving up to approximately 340 m / 372 yd when using two skeins.

Alternative Yarn:
DROPS Fabel or another fingering-weight sock yarn that achieves the required gauge.

Gauge:
36 stitches × 44 rounds = 4" / 10 cm in stockinette stitch, worked in the round and unblocked.

Suggested Needles:
2.25 mm (US 1) circular needle with a 32" / 81 cm cable for magic loop, or size required to obtain gauge.

Notions:

• Yarn needle

• Scissors

Full yarn, needle, gauge and notion information is included in the PDF pattern.

CONSTRUCTION + TECHNIQUES

This pattern includes the following techniques:

• Long-tail cast-on

• Working in the round using magic loop

• 2 x 2 ribbing

• Stockinette stitch

• Slip-stitch heel flap

• Traditional heel turn

• Picking up heel-flap stitches

• Gusset shaping and decreases

• Toe decreases

• Kitchener stitch

NORWEGIAN KNITTING TUTORIALS

M1R KNIT specializes in teaching the Norwegian knitting method, a continental-style knitting technique with the working yarn held in the left hand.

You do not need to use the Norwegian knitting method to make this pattern unless specifically stated.

Where helpful, the pattern includes links to M1R KNIT video tutorials demonstrating knitting techniques using the Norwegian knitting method.

WHAT'S INCLUDED

✔ Complete downloadable PDF knitting pattern
✔ Step-by-step written instructions
✔ Adult S, M and L sizing
✔ Finished measurements
✔ Size chart
✔ Yarn requirements
✔ Needle and notion information
✔ Gauge information
✔ Pattern abbreviations and technique notes
✔ Kitchener stitch instructions
✔ Links to helpful M1R KNIT tutorials where applicable
✔ Original M1R KNIT design

DIGITAL DOWNLOAD

This listing is for a DIGITAL PDF KNITTING PATTERN ONLY.

No physical product or finished knitted item will be shipped.

Your pattern will be available for digital download after purchase.

USAGE + COPYRIGHT

For personal, non-commercial use only.

Items made from this pattern may not be sold.

Pattern may not be shared, copied or redistributed.

© M1R KNIT. All Rights Reserved.

PATTERN SUPPORT

Questions while knitting? I’m happy to help.

Find more knitting patterns, tutorials and technique guides from M1R KNIT:

Website: M1RKNIT.com
YouTube: @m1rknit
Instagram: @m1rknit
Ravelry: M1R KNIT

SHARE YOUR PROJECT

I’d love to see what you make.

Tag @m1rknit when sharing your finished M1R KNIT project.

The Beanie 04 Knitting Pattern is an advanced beginner pattern for knitting a classic textured beanie with a folded ribbed brim and an all-over knit-and-purl stitch pattern.

Worked seamlessly in the round from the bottom up, Beanie 04 combines a simple twisted rib brim with subtle staggered texture through the body and shaped crown. The result is a warm, comfortable everyday beanie with a clean, modern finish.

The downloadable PDF includes clear written instructions, finished measurements, yarn requirements, gauge information, abbreviations, pattern notes, and technique guidance to help you complete your project.

ABOUT THE PATTERN

Beanie 04 is worked seamlessly in the round from the bottom up.

The beanie begins with a deep 1 × 1 twisted rib brim before transitioning into a four-round textured stitch pattern created with knit and purl stitches. The crown is shaped with evenly spaced decreases while continuing the texture through the shaping.

Pattern Type: Beanie
Skill Level: Advanced Beginner
Construction: Bottom-up, worked seamlessly in the round
Yarn Weight: Worsted
Sizes: One Size

SKILL LEVEL

ADVANCED BEGINNER

This pattern is suitable for knitters comfortable with:

• Casting on

• Joining and knitting in the round

• Knit and purl stitches

• Knitting through the back loop

• Following a repeating stitch pattern

• Working decreases with k2tog

• Working small circumferences for crown shaping

SIZES + FINISHED MEASUREMENTS

Sizes Included:
One Size

Designed to Fit:
Adult head circumference: 20–23"/51–58 cm

Finished Measurements:
Finished circumference, unstretched: approximately 17.75"/45 cm
Finished height, with brim folded: approximately 8.5"/21.6 cm

YARN + GAUGE

Suggested Yarn:
Lion Brand Wool-Ease Worsted Weight in Arrowwood

Yarn Weight:
Worsted

Yarn Requirements:
One Size: 1 skein — 85 g/180 m

Gauge:
19 stitches × 26 rounds = 4"/10 cm in stitch pattern, blocked.

Suggested Needles:

3.5 mm/US 4 circular needle for ribbing

4.5 mm/US 7 circular needle, or size needed to obtain gauge, for main fabric

16"/40 cm circular needle for the majority of the beanie; use your preferred small-circumference method for the crown

Notions:

• Yarn needle

• Stitch markers

• Beginning-of-round marker

• Scissors

Full yarn, needle, gauge, and notion information is included in the PDF pattern.

CONSTRUCTION + TECHNIQUES

This pattern includes the following techniques:

• Knitting in the round

• 1 × 1 twisted rib

• Knit and purl texture

• Knitting through the back loop

• Repeating a four-round stitch pattern

• K2tog decreases

• Crown shaping

• Finishing and blocking

NORWEGIAN KNITTING TUTORIALS

M1R KNIT specializes in teaching the Norwegian knitting method, a continental-style knitting technique with the working yarn held in the left hand.

You do not need to use the Norwegian knitting method to make this pattern unless specifically stated.

Where helpful, the pattern includes links to M1R KNIT video tutorials demonstrating knitting techniques using the Norwegian knitting method.

WHAT'S INCLUDED

✔ Complete downloadable PDF knitting pattern
✔ Step-by-step written instructions
✔ Sizing and finished measurements
✔ Yarn requirements
✔ Needle and notion information
✔ Gauge information
✔ Pattern abbreviations and technique notes
✔ Swatching instructions
✔ Links to helpful M1R KNIT tutorials where applicable
✔ Original M1R KNIT design

DIGITAL DOWNLOAD

This listing is for a DIGITAL PDF KNITTING PATTERN ONLY.

No physical product or finished knitted item will be shipped.

Your pattern will be available for digital download after purchase.

USAGE + COPYRIGHT

This knitting pattern and its instructions may not be shared, copied, reproduced, or redistributed.

Small businesses with an annual income of CAD $30,000 or less may sell finished items made from this pattern provided credit is given to M1R KNIT.

© M1R KNIT. All Rights Reserved.

PATTERN SUPPORT

Questions while knitting? I’m happy to help.

Find more knitting patterns, tutorials, and technique guides from M1R KNIT:

Website: M1RKNIT.com
YouTube: @m1rknit
Instagram: @m1rknit
Ravelry: M1R KNIT

SHARE YOUR PROJECT

I’d love to see what you make.

Tag @m1rknit when sharing your finished M1R KNIT project.

The Neck Warmer 01 Knitting Pattern is an advanced beginner pattern for knitting a classic cold-weather accessory featuring a deep roll neck, smooth stockinette body, ribbed lower edge, shaped neckline, and applied i-cord edging.

Designed to layer easily beneath coats and jackets, Neck Warmer 01 gives you the warmth and look of a turtleneck without the bulk of a full sweater. Its simple silhouette and clean finishing make it a versatile addition to a handmade wardrobe.

The downloadable PDF includes clear written instructions, finished measurements, yarn requirements, gauge information, abbreviations, pattern notes, and technique guidance to help you complete your project.

ABOUT THE PATTERN

Neck Warmer 01 is worked from the bottom up in separate front and back pieces. Both pieces begin with 1 × 1 ribbing before continuing in stockinette stitch and shaping the neckline and shoulders.

The shoulders are seamed before stitches are picked up around the neckline for the roll neck, which is worked in the round in 1 × 1 rib. Applied i-cord edging is added along both side edges for a clean, finished look.

Pattern Type: Neck Warmer / Accessory
Skill Level: Advanced Beginner
Construction: Bottom-up; front and back worked flat; shoulders seamed; roll neck worked in the round
Yarn Weight: DK
Sizes: One Size

SKILL LEVEL

ADVANCED BEGINNER

This pattern is suitable for knitters comfortable with:

• Knitting and purling

• Working stockinette stitch

• Working 1 × 1 ribbing

• Basic decreases

• Working flat and in the round

• Picking up and knitting stitches

• Seaming shoulders

• Applied i-cord edging

• Stretchy bind-off techniques

SIZES + FINISHED MEASUREMENTS

Sizes Included:
One Size

Finished Measurements:

• Total Length: 12"/30.5 cm

• Neck Width: 9.5"/24 cm

• Front Neck Depth: 2.5"/6.35 cm

• Neckband Width: 9.5"/24 cm

• Roll Neck Height: 8"/20 cm

YARN + GAUGE

Suggested Yarn:
Sandnes Garn Double Sunday — 3880 Dark Chocolate

Yarn Weight:
DK

Yarn Requirements:
4 skeins — 200 g/432 m

50 g/108 m per skein

Gauge:
20 stitches × 29 rows = 4"/10 cm in stockinette stitch, blocked.

Suggested Needles:

• 3.25 mm/US 3 needles for ribbing and applied i-cord edging

• 4 mm/US 6 needles for stockinette stitch, or size needed to obtain gauge

• 32"/81 cm circular needle

• 16"/40 cm circular needle

• 3.25 mm/US 3 DPNs for applied i-cord edging

Notions:

• Yarn needle

• Stitch markers

• Beginning-of-round marker

• Scissors

Full yarn, needle, gauge, and notion information is included in the PDF pattern.

CONSTRUCTION + TECHNIQUES

This pattern includes the following techniques:

• Long-tail cast-on

• 1 × 1 ribbing

• Stockinette stitch

• Knit and purl decreases

• Shaping a front and back neckline

• Shoulder seaming

• Picking up and knitting neckline stitches

• Knitting in the round

• Applied i-cord edging

• Stretchy bind-off

NORWEGIAN KNITTING TUTORIALS

M1R KNIT specializes in teaching the Norwegian knitting method, a continental-style knitting technique with the working yarn held in the left hand.

You do not need to use the Norwegian knitting method to make this pattern unless specifically stated.

Where helpful, the pattern includes links to video tutorials demonstrating knitting and finishing techniques.

WHAT'S INCLUDED

✔ Complete downloadable PDF knitting pattern
✔ Step-by-step written instructions
✔ Finished measurements
✔ Yarn requirements
✔ Needle and notion information
✔ Gauge information
✔ Pattern abbreviations and technique notes
✔ Links to helpful knitting tutorials where applicable
✔ Original M1R KNIT design

DIGITAL DOWNLOAD

This listing is for a DIGITAL PDF KNITTING PATTERN ONLY.

No physical product or finished knitted item will be shipped.

Your pattern will be available for digital download after purchase.

USAGE + COPYRIGHT

This pattern may not be shared, copied, reproduced, or redistributed.

Small businesses with an annual income of $30,000 CAD or less may sell finished items made from this pattern with credit given to M1R KNIT.

© M1R KNIT. All Rights Reserved.

PATTERN SUPPORT

Questions while knitting? I’m happy to help.

Find more knitting patterns, tutorials, and technique guides from M1R KNIT:

Website: M1RKNIT.com
YouTube: @m1rknit
Instagram: @m1rknit
Ravelry: M1R KNIT

SHARE YOUR PROJECT

I’d love to see what you make.

Tag @m1rknit when sharing your finished M1R KNIT project.

The Beanie 05 Knitting Pattern is an advanced beginner pattern for knitting a classic fitted beanie featuring a deep folded ribbed brim, smooth stockinette body, and gradually shaped crown.

Worked with one strand of worsted-weight wool held together with one strand of silk mohair, Beanie 05 has a soft, warm fabric with a subtle mohair halo. The timeless silhouette is designed to fit most adult head sizes with comfortable negative ease.

The downloadable PDF includes clear written instructions, sizing and finished measurements, yarn requirements, gauge information, schematics, and technique guidance to help you complete your project.

ABOUT THE PATTERN

Beanie 05 is worked bottom-up, seamlessly in the round. The beanie begins with 1 × 1 ribbing to create a generous folded brim before transitioning to stockinette stitch for the body.

The crown is divided into three sections and shaped with paired decreases for a clean, gradually rounded finish. The pattern is worked holding one strand of worsted-weight wool together with one strand of lace-weight silk mohair throughout.

Pattern Type: Beanie
Skill Level: Advanced Beginner
Construction: Bottom-up, worked seamlessly in the round
Yarn Weight: Worsted + Lace Weight Mohair held together
Sizes: One Size

SKILL LEVEL

ADVANCED BEGINNER

This pattern is suitable for knitters comfortable with:

• Casting on

• Working knit and purl stitches

• Working in the round

• Working 1 × 1 ribbing

• Working with two strands of yarn held together

• Basic increases and decreases

• Using Magic Loop or double-pointed needles for small circumferences

SIZES + FINISHED MEASUREMENTS

Sizes Included:
One Size

Designed to Fit:
Head circumference: 21–23"/53–58.5 cm

Finished Measurements:
Circumference: 18.5"/47 cm
Height with brim folded: 9.5"/24 cm
Height with brim unfolded: 12.5"/32 cm
Brim depth unfolded: 6"/15 cm
Brim depth folded: 3"/7.5 cm

YARN + GAUGE

Suggested Yarn:

Knomad Marshmallow Superwash Worsted
100 g/219 yds per skein

held together with

Knomad Cirrus Lace Weight Silk Mohair
50 g/437 yds per skein

Yarn Weight:
One strand worsted weight + one strand lace-weight silk mohair held together

Yarn Requirements:
One Size: 1 skein worsted-weight yarn + 1 skein lace-weight silk mohair

Gauge:
19 stitches × 26 rounds = 4"/10 cm in stockinette stitch, worked in the round and blocked.

Suggested Needles:
3.25 mm/US 3, 16" circular needle for brim
3.5 mm/US 4, 16" circular needle for body
3.5 mm/US 4 long circular needle for Magic Loop or DPNs for crown shaping
Or needle size needed to obtain gauge

Notions:

• Tapestry needle

• Stitch markers

• Beginning-of-round marker

• Scissors

Full yarn, needle, gauge, and notion information is included in the PDF pattern.

CONSTRUCTION + TECHNIQUES

This pattern includes the following techniques:

• Long-tail cast-on

• Working in the round

• 1 × 1 ribbing

• Stockinette stitch in the round

• Holding two strands of yarn together

• Kfb increase

• Ssk and k2tog decreases

• Crown shaping

• Magic Loop or DPNs for working a small circumference

• Finishing and blocking

NORWEGIAN KNITTING TUTORIALS

M1R KNIT specializes in teaching the Norwegian knitting method, a continental-style knitting technique with the working yarn held in the left hand.

You do not need to use the Norwegian knitting method to make this pattern unless specifically stated.

Where helpful, the pattern includes links to M1R KNIT video tutorials demonstrating knitting techniques using the Norwegian knitting method.

WHAT'S INCLUDED

✔ Complete downloadable PDF knitting pattern
✔ Step-by-step written instructions
✔ Sizing and finished measurements
✔ Yarn requirements
✔ Needle and notion information
✔ Gauge information
✔ Pattern abbreviations and technique notes
✔ Beanie schematic
✔ Links to helpful M1R KNIT tutorials where applicable
✔ Original M1R KNIT design

DIGITAL DOWNLOAD

This listing is for a DIGITAL PDF KNITTING PATTERN ONLY.

No physical product or finished knitted item will be shipped.

Your pattern will be available for digital download after purchase.

USAGE + COPYRIGHT

For personal use only.

The pattern itself may not be shared, copied, reproduced, or redistributed.

Please refer to the PDF pattern for M1R KNIT's current terms regarding the sale of finished items made from this design.

© M1R KNIT. All Rights Reserved.

PATTERN SUPPORT

Questions while knitting? I’m happy to help.

Find more knitting patterns, tutorials, and technique guides from M1R KNIT:

Website: M1RKNIT.com
YouTube: @m1rknit
Instagram: @m1rknit
Ravelry: M1R KNIT

SHARE YOUR PROJECT

I’d love to see what you make.

Tag @m1rknit when sharing your finished M1R KNIT project.

DOWNLOAD THIS PATTERN FOR FREE WHEN YOU SUBSCRIBE TO MY NEWSLETTER HERE: https://m1rknit.com/subscribe

The Beanie 03 Knitting Pattern is a beginner pattern for knitting a classic super-bulky beanie featuring a deep 2×2 ribbed brim, smooth stockinette body and simple shaped crown.

Designed for a snug, comfortable fit, Beanie 03 has a clean, modern look and plenty of warmth. Super-bulky yarn and straightforward construction make it a quick, approachable project with a polished finished result.

The downloadable PDF includes clear written instructions, sizing and finished measurements, yarn requirements, gauge information, and technique guidance to help you complete your project.

ABOUT THE PATTERN

Beanie 03 is worked seamlessly in the round from the bottom up, beginning with a 2×2 ribbed brim before transitioning to a stockinette body.

The crown is shaped with evenly spaced knit-two-together decreases to create a smooth, rounded finish. The pattern includes two adult sizes and is designed with negative ease for a close, comfortable fit.

Pattern Type: Beanie
Skill Level: Beginner
Construction: Bottom-up, worked seamlessly in the round
Yarn Weight: Super Bulky
Sizes: Standard, Large

SKILL LEVEL

BEGINNER

This pattern is suitable for knitters comfortable with:

• Long-tail cast on

• Knitting and purling

• Working 2×2 ribbing

• Knitting in the round

• Working stockinette stitch in the round

• K2tog decreases

• Basic crown shaping

SIZES + FINISHED MEASUREMENTS

Sizes Included:
Standard
Large

Designed to Fit:

Standard: 20–22"/51–56 cm head circumference
Large: 22–24"/56–61 cm head circumference

Finished Measurements:

Standard: 18"/45.5 cm finished circumference
Large: 20"/51 cm finished circumference

Finished Length: 10.5"/26.5 cm
Brim Depth: 3"/7.5 cm

Recommended Ease:
Approximately 2–4"/5–10 cm of negative ease for a snug, comfortable fit.

If you are between sizes, choose the larger size for a more relaxed fit or the smaller size for a closer fit.

YARN + GAUGE

Suggested Yarn:
Knomad Tundra

100% Andean Highland Wool
44 yd / 100 g

Yarn Weight:
Super Bulky

Yarn Requirements:

Standard/Large: Approximately 140 g / 62 yd total

Purchase 2 × 100 g hanks.

Gauge:
8 stitches × 12 rounds = 4"/10 cm in stockinette stitch, blocked.

Suggested Needles:
9 mm / US 13 16"/40 cm circular needle, or size required to obtain gauge

For crown shaping:
9 mm / US 13 circular needle with approximately 40"/100 cm cable for magic loop, or your preferred method for working a small circumference in the round.

Notions:

• Yarn needle

• Stitch markers

• Beginning-of-round marker

• Scissors

Full yarn, needle, gauge, and notion information is included in the PDF pattern.

CONSTRUCTION + TECHNIQUES

This pattern includes the following techniques:

• Long-tail cast on

• Joining to work in the round

• 2×2 ribbing

• Stockinette stitch in the round

• Placing and slipping stitch markers

• K2tog decreases

• Crown shaping

• Working a small circumference in the round

• Finishing and weaving in ends

• Blocking

NORWEGIAN KNITTING TUTORIALS

M1R KNIT specializes in teaching the Norwegian knitting method, a continental-style knitting technique with the working yarn held in the left hand.

You do not need to use the Norwegian knitting method to make this pattern unless specifically stated.

Where helpful, the pattern includes links to M1R KNIT video tutorials demonstrating knitting techniques using the Norwegian knitting method.

WHAT'S INCLUDED

✔ Complete downloadable PDF knitting pattern
✔ Step-by-step written instructions
✔ Two adult sizes
✔ Sizing and finished measurements
✔ Yarn requirements
✔ Needle and notion information
✔ Gauge and gauge swatch information
✔ Pattern abbreviations and technique notes
✔ Beanie schematic with finished measurements
✔ Blocking instructions
✔ Links to helpful M1R KNIT tutorials where applicable
✔ Original M1R KNIT design

DIGITAL DOWNLOAD

This listing is for a DIGITAL PDF KNITTING PATTERN ONLY.

No physical product or finished knitted item will be shipped.

Your pattern will be available for digital download after purchase.

USAGE + COPYRIGHT

© M1R KNIT. All Rights Reserved.

Pattern may not be shared, copied, or redistributed.

If you are a small business with an annual income of $30,000 CAD or less, you are welcome to sell finished items made from this pattern with credit given to M1R KNIT.

PATTERN SUPPORT

Questions while knitting? I’m happy to help.

Find more knitting patterns, tutorials, and technique guides from M1R KNIT:

Website: M1RKNIT.com
YouTube: @m1rknit
Instagram: @m1rknit
Ravelry: M1R KNIT

SHARE YOUR PROJECT

I’d love to see what you make.

Tag @m1rknit when sharing your finished M1R KNIT project.

The SCARF 01 Knitting Pattern is a beginner pattern for knitting a classic tubular scarf worked seamlessly in the round in stockinette stitch.

The double-layered construction creates a simple, substantial scarf with a smooth stockinette finish and clean, minimalist look. An optional crocheted slip-stitch edging can be added to each end for a neat finished edge.

The downloadable PDF includes clear written instructions, finished measurements, yarn requirements, gauge information, abbreviations, and technique guidance to help you complete your project.

ABOUT THE PATTERN

SCARF 01 is worked seamlessly in the round from one end to the other using stockinette stitch.

The scarf is constructed as a continuous knitted tube, creating a naturally double-layered fabric without seaming. The length can easily be adjusted by working additional or fewer rounds, and an optional crochet slip-stitch edging may be added after binding off.

Pattern Type: Scarf
Skill Level: Beginner
Construction: Seamlessly worked in the round / tubular construction
Yarn Weight: DK
Sizes: One Size

SKILL LEVEL

BEGINNER

This pattern is suitable for knitters comfortable with:

• Long-tail cast on

• Joining knitting to work in the round

• Knitting in the round

• Stockinette stitch in the round

• Binding off

• Weaving in ends

• Optional crochet slip-stitch edging

SIZES + FINISHED MEASUREMENTS

Sizes Included:
One Size

Finished Measurements:
Approximately 8" (20 cm) wide when laid flat × 84" (213 cm) long

The scarf is worked as a tube, creating a double layer of knitted fabric.

YARN + GAUGE

Suggested Yarn:
DROPS Design Sky

Yarn Weight:
DK

Suggested Colour:
02 Pearl Grey

Yarn Requirements:
6 × 50 g balls
Approximately 1,140 m / 1,247 yd total

Gauge:
21 stitches × 28 rounds = 4" / 10 cm in stockinette stitch worked in the round, unblocked.

Gauge is not critical for this scarf, although differences in gauge may affect the finished dimensions and yarn requirements.

Suggested Needles:
4 mm (US 6) circular needle, or size needed to obtain gauge

Optional:
4 mm (G-6) crochet hook for slip-stitch edging

Notions:

• Stitch marker

• Yarn needle

• Scissors

Full yarn, needle, gauge, and notion information is included in the PDF pattern.

CONSTRUCTION + TECHNIQUES

This pattern includes the following techniques:

• Long-tail cast on

• Joining to work in the round

• Seamless tubular construction

• Stockinette stitch in the round

• Binding off

• Weaving in ends

• Optional crochet slip-stitch edging

NORWEGIAN KNITTING TUTORIALS

M1R KNIT specializes in teaching the Norwegian knitting method, a continental-style knitting technique with the working yarn held in the left hand.

You do not need to use the Norwegian knitting method to make this pattern unless specifically stated.

Where helpful, M1R KNIT provides video tutorials demonstrating knitting techniques using the Norwegian knitting method.

WHAT'S INCLUDED

✔ Complete downloadable PDF knitting pattern
✔ Step-by-step written instructions
✔ Finished measurements
✔ Yarn requirements
✔ Needle and notion information
✔ Gauge information
✔ Pattern abbreviations and technique notes
✔ Optional crochet finishing instructions
✔ Links to helpful M1R KNIT resources where applicable
✔ Original M1R KNIT design

DIGITAL DOWNLOAD

This listing is for a DIGITAL PDF KNITTING PATTERN ONLY.

No physical product or finished knitted item will be shipped.

Your pattern will be available for digital download after purchase.

USAGE + COPYRIGHT

©2026 M1R KNIT. All Rights Reserved.

The pattern itself may not be copied, shared, reproduced, or redistributed.

Small businesses with an annual income of $30,000 CAD or less may sell finished items made from this pattern with credit given to M1R KNIT.

PATTERN SUPPORT

Questions while knitting? I’m happy to help.

Find more knitting patterns, tutorials, and technique guides from M1R KNIT:

Website: M1RKNIT.com
YouTube: @m1rknit
Instagram: @m1rknit
Ravelry: M1R KNIT

SHARE YOUR PROJECT

I’d love to see what you make.

Tag @m1rknit when sharing your finished M1R KNIT project.